Photons can hide where they have been

Recently,the nested Mach–Zehnder interferometer[Phys.Rev.Lett.111,240402(2013)]was modified by adding Dove prisms in a paper[Quantum Stud.:Math.Found.2,255(2015)],and an interesting result is that,after the Dove prisms were inserted,a signal at the first mirror of the nested interferometer was obtained.But,according to the former original paper,the photons have never been present near that mirror.In this work,we interpret this result naturally by resorting to the three-path interference method.Moreover,we find that even though the photons have been somewhere,they can hide the trace of being there.     

Thermal decomposed behavior and kinetic study for untreated and flame retardant treated regenerated cellulose fibers using thermogravimetric analysis

Journal of Thermal Analysis and Calorimetry - In the present work, pyrolysis kinetic mechanism was studied for regenerated cellulosic fiber (RCF) and composite RCF containing silicon/nitrogen flame...     

Chemical composition and anti-complement activity of Glechomae Herba collected in different months

Glechomae Herba (GH) is derived from the dried aerial part of Glechoma longituba (Nakai) Kupr., which is harvested from spring to autumn. It has the effects of clearing heat and detoxification. The aim of this paper was to study the chemical composition and the anti-complement activity of GH collected in different months. Ultra-high-performance liquid chromatography coupled to quadrupole time-of-flight tandem mass spectrometry based on predicted compounds screening and diagnostic ion filter strategy was developed for identifying the chemical composition of GH collected in different months. A total of 102 compounds—40 chlorogenic acids (CGAs), 32 phenolic acids, and 30 flavonoids—were reasonably identified in GH. Thirty-four CGAs were discovered in GH for the first time. The correlations between chemical compositions and anti-complement activities of GH collected in different months were analyzed. Phenolic acids and flavonoids were found to be negatively correlated with anti-complement activity, and CGAs were positively correlated with anti-complement activity. At the same time, six CGA standards had obvious anti-complement activity. It was demonstrated that different harvest months had a significant impact on the difference in chemical composition and anti-complement activity of GH. And CGAs might play an important role in the anti-complement activity of GH.     

Kinetics of hydrogen peroxide decomposition catalyzed by Cu-buserite over a well-sealed and thermostated kinetics assembly

Herein a well-sealed and thermostated kinetics assembly is designed and built, which can run stirred at different reaction temperatures. With the reaction assembly above and the volumetric method together, the hydrogen peroxide (H₂O₂) decomposition reaction kinetics is systematically investigated under a variety of reaction conditions over a copper-doped buserite-type layer manganese oxide (referred to as Cu-buserite) as a heterogeneous catalyst. The overall second-order rate law is fitted out by the linear regression analysis, with the reaction orders with respect to both H₂O₂ and Cu-buserite determined to each be equal to 1, and then explicitly explained by the proposed Michaelis-Menten like mechanism. The apparent activation energy E_a is estimated as 33.5 ± 2.5 kJ mol⁻¹.     

Hierarchical Mn3O4 Anchored on 3D Graphene Aerogels via C−O−Mn Linkage with Superior Electrochemical Performance for Flexible Asymmetric Supercapacitor

Flexible asymmetric supercapacitors are more appealing in flexible electronics because of high power density, wide cell voltage, and higher energy density than symmetric supercapacitors in aqueous electrolyte. In virtues of excellent conductivity, rich porous structure and interconnected honeycomb structure, three dimensional graphene aerogels show great potential as electrode in asymmetric supercapacitors. However, graphene aerogels are rarely used in flexible asymmetric supercapacitors because of easily re-stacking of graphene sheets, resulting in low electrochemical activity. Herein, flower-like hierarchical Mn₃O₄ and carbon nanohorns are incorporated into three dimensional graphene aerogels to restrain the stack of graphene sheets, and are applied as the positive and negative electrode for asymmetric supercapacitors devices, respectively. Besides, a strong chemical coupling between Mn₃O₄ and graphene via the C-O-Mn linkage is constructed and can provide a good electron-transport pathway during cycles. Consequently, the asymmetric supercapacitor device shows high rate cycle stability (87.8 % after 5000 cycles) and achieves a high energy density of 17.4 μWh cm⁻² with power density of 14.1 mW cm⁻² (156.7 mW cm⁻³) at 1.4 V.     

Hierarchical Hollow-Nanocube Ni−Co Skeleton@MoO3/MoS2 Hybrids for Improved-Performance Lithium-Ion Batteries

Improving the performance of anode materials for lithium-ion batteries (LIBs) is a hotly debated topic. Herein, hollow Ni−Co skeleton@MoS₂/MoO₃ nanocubes (NCM-NCs), with an average size of about 193 nm, have been synthesized through a facile hydrothermal reaction. Specifically, MoO₃/MoS₂ composites are grown on Ni−Co skeletons derived from nickel–cobalt Prussian blue analogue nanocubes (Ni−Co PBAs). The Ni−Co PBAs were synthesized through a precipitation method and utilized as self-templates that provided a larger specific surface area for the adhesion of MoO₃/MoS₂ composites. According to Raman spectroscopy results, as-obtained defect-rich MoS₂ is confirmed to be a metallic 1T-phase MoS₂. Furthermore, the average particle size of Ni−Co PBAs (≈43 nm) is only about one-tenth of the previously reported particle size (≈400 nm). If assessed as anodes of LIBs, the hollow NCM-NC hybrids deliver an excellent rate performance and superior cycling performance (with an initial discharge capacity of 1526.3 mAh g⁻¹ and up to 1720.6 mAh g⁻¹ after 317 cycles under a current density of 0.2 A g⁻¹). Meanwhile, ultralong cycling life is retained, even at high current densities (776.6 mAh g⁻¹ at 2 A g⁻¹ after 700 cycles and 584.8 mAh g⁻¹ at 5 A g⁻¹ after 800 cycles). Moreover, at a rate of 1 A g⁻¹, the average specific capacity is maintained at 661 mAh g⁻¹. Thus, the hierarchical hollow NCM-NC hybrids with excellent electrochemical performance are a promising anode material for LIBs.     

Iron-Catalyzed Cleavage Reaction of Keto Acids with Aliphatic Aldehydes for the Synthesis of Ketones and Ketone Esters

The radical–radical coupling reaction is an important synthetic strategy. In this study, the iron-catalyzed radical–radical cross-coupling reaction based on the decarboxylation of keto acids and decarbonylation of aliphatic aldehydes to obtain valuable aryl ketones is reported for the first time. Remarkably, when tertiary aldehydes were used as carbonyl sources, ketone esters were selectively obtained instead of ketones. The gram-scale preparation of aryl ketone through this strategy was easily achieved by using only 3 mol % of the iron catalyst. As a proof-of-concept, the bioactive molecule flurprimidol was synthesized in two steps by using this strategy.     

Hexagonal La2O3 Nanocrystals Chemically Coupled with Nitrogen-Doped Porous Carbon as Efficient Catalysts for the Oxygen Reduction Reaction

The construction of nano-scale hybrid materials with a smart interfacial structure, established by using rare earth oxides and carbon as building blocks, is essential for the development of economical and efficient catalysts for oxygen reduction reactions (ORRs). In this work, hexagonal La₂O₃ nanocrystals on a nitrogen-doped porous carbon (NPC) derived from crop radish, served as building bricks, are prepared by chemical precipitation and then calcination at elevated temperatures. The obtained La₂O₃/NPC hybrid exhibits a very high ORR activity with a half-wave potential of 0.90 V, exceeding that of commercial Pt/C (0.83 V). Both DFT theoretical and experimental results have verified that the significantly enhanced catalytic performance is ascribed to the formation of the C−O−La covalent bonds between carbon and La₂O₃. Through the covalent bonds, electrons can transfer from the carbon to La₂O₃ and occupy the unfilled e_g orbital of the La₂O₃ phase. This results in the accelerated adsorption of active oxygen and the facilitated desorption of the surface hydroxides (OH_ad⁻), thereby promoting the ORR over the catalyst.     

Recent Advances in Iodine-Promoted C−S/N−S Bonds Formation

Sulfur-containing scaffold, as a ubiquitous structural motif, has been frequently used in natural products, bioactive chemicals and pharmaceuticals, particularly C−S/N−S bonds are indispensable in many biological important compounds and pharmaceuticals. Development of mild and general methods for C−S/N−S bonds formation has great significance in modern research. Iodine and its derivatives have been recognized as inexpensive, environmentally benign and easy-handled catalysts or reagents to promote the construction of C−S/N−S bonds under mild reaction conditions, with good regioselectivities and broad substrate scope. Especially based on this, several new strategies, such as oxidation relay strategy, have been greatly developed and accelerated the advancement of this field. This review focuses on recent advances in iodine and its derivatives promoted hybridized C−S/N−S bonds formation. The features and mechanisms of corresponding reactions are summarized and the results of some cases are compared with those of previous reports. In addition, the future of this domain is discussed.     

Ultrathin Mn Doped Ni-MOF Nanosheet Array for Highly Capacitive and Stable Asymmetric Supercapacitor

In this study, we demonstrate that an Mn-doped ultrathin Ni-MOF nanosheet array on nickel foam (Mn_0.1-Ni-MOF/NF) serves as a highly capacitive and stable supercapacitor positive electrode. The Mn_0.1-Ni-MOF/NF shows an areal capacity of 6.48 C cm⁻² (specific capacity C: 1178 C g⁻¹) at 2 mA cm⁻² in 6.0 m KOH, outperforming most reported MOF-based materials. More importantly, it possesses excellent cycle stability to maintain 80.6 % capacity after 5000 cycles. An asymmetric supercapacitor device utilizing Mn_0.1-Ni-MOF/NF as the positive electrode and activated carbon as the negative electrode attains a high energy density of 39.6 Wh kg⁻¹ at 143.8 Wkg⁻¹ power density with a capacitance retention of 83.6 % after 5000 cycles.